Skip to main content

jerseyfingerprinting

Getting fingerprinted is often an important step for employment, professional licensing, FBI background checks, immigration-related paperwork, adoption, and other official requirements. But what happens when your fingerprint card is rejected?A rejected fingerprint card can delay important background checks, employment applications, and professional licensing. Understanding the most common rejection reasons can help you avoid unnecessary resubmissions.

Whether you need an FD-258 fingerprint card or another type of fingerprint submission, understanding the reasons behind fingerprint rejection can help you avoid costly mistakes.

In this guide, Jersey Fingerprinting explains seven common reasons fingerprints get rejected, how to prevent these problems, and what to do if your submission is returned.

Why Do Fingerprint Cards Get Rejected?

Fingerprint cards can be rejected when the receiving agency cannot properly process or compare the fingerprints. This may happen because impressions are unclear, incomplete, incorrectly positioned, or accompanied by missing information.

The FBI provides detailed fingerprint submission guidelines and identifies poor image quality, incorrectly placed fingers, missing impressions, and incomplete required information as potential causes of rejection or processing delays.

Here are seven important issues to watch for.

1. Smudged or Blurry Fingerprints

One of the most common reasons for a rejected fingerprint card is poor fingerprint image quality. A rejected fingerprint card is often caused by smudged impressions that make fingerprint ridge patterns difficult to identify. Proper ink application and professional fingerprint capture can help prevent this issue.

When ink is applied unevenly or a finger moves incorrectly during rolling, the fingerprint ridges may become blurred or smudged. This makes it difficult for fingerprint processing systems to distinguish the unique ridge patterns.

Common Causes

  • Applying too much ink to the fingertips.
  • Moving or sliding the finger during capture.
  • Applying excessive pressure while rolling.
  • Using an inconsistent fingerprinting technique.

How to Avoid It

Have your fingerprints captured by a trained technician who understands proper rolling techniques, pressure, and ink application. The technician should inspect the impressions before the fingerprint card is finalized.

2. Fingerprints That Are Too Light or Too Dark

Fingerprint impressions must have sufficient contrast and clearly visible ridge details.

If the impressions are too light, important ridge patterns may be missing. If they are too dark, excess ink can fill the spaces between ridges and make the print difficult to read.

How to Avoid It

  • Use the appropriate amount of fingerprint ink.
  • Avoid pressing fingers too hard against the card.
  • Make sure hands are clean before fingerprinting.
  • Ask the technician to inspect each impression for readability.

Properly captured fingerprints should show clear ridge details without excessive ink buildup or missing portions.

3. Dry, Damaged, or Worn Fingerprints

The FBI’s official fingerprint recording guidelines explain how proper hand preparation, rolling techniques, and image-quality checks can reduce fingerprint rejection

Skin condition can significantly affect fingerprint quality. Dry or damaged fingertips can result in a rejected fingerprint card when the fingerprint impressions do not contain sufficient ridge detail.

People who frequently work with chemicals, perform manual labor, or have naturally dry skin may have difficulty producing clearly defined fingerprint impressions.

Temporary cuts, peeling skin, and worn ridge patterns can also interfere with fingerprint capture.

How to Avoid It

  • Keep your hands moisturized in the days before your appointment.
  • Avoid harsh chemicals or unnecessary skin abrasion when possible.
  • Wash your hands before fingerprinting.
  • Tell your fingerprinting technician about cuts, scars, or damaged skin.
  • Avoid applying excessive lotion immediately before ink fingerprinting.

For very dry fingertips, a technician may recommend a small amount of lotion followed by removal of the residue before capture.

If your ridge patterns are permanently worn, ask the receiving agency about its procedures for difficult-to-capture fingerprints.

4. Incorrect Finger Placement or Missing Impressions

You can also review the official FBI FD-258 fingerprint card   to understand the correct placement of rolled and plain impressions. Every fingerprint must be placed in its designated section of the fingerprint card.

For example, an FD-258 card includes individual rolled impressions and plain impressions. If fingerprints are captured in the wrong boxes, entered out of sequence, or left missing without an appropriate notation, the card may be rejected.

Common Mistakes

  • Placing a right-hand fingerprint in a left-hand box.
  • Recording the same finger more than once.
  • Leaving required fingerprint sections blank.
  • Missing required plain or simultaneous impressions.
  • Capturing multiple fingerprint impressions in one block.

How to Avoid It

Make sure the technician follows the correct fingerprint sequence and checks every required section before completing the card.

Where a fingerprint cannot be obtained because of an amputation or another physical condition, the appropriate notation must be recorded according to the receiving agency’s instructions.

5. Incomplete or Incorrect Personal Information

Not every rejected fingerprint card is caused by the fingerprints themselves. Missing or incorrect information can also lead to rejection or processing delays. Even with clear fingerprints, a rejected fingerprint card may result from missing personal details, incorrect agency information, or incomplete required fields.

Required fields depend on the submission type and receiving agency. An FD-258 card may require information such as:

  • Full legal name.
  • Date and place of birth.
  • Required identifying information.
  • Reason for fingerprinting.
  • Date fingerprints were taken.
  • Originating Agency Identifier (ORI), where required.
  • Other required agency information.

How to Avoid It

Review every required field carefully. Ensure the information matches your identification and the requesting agency’s instructions.

For paper FBI submissions, use legible blue or black ink for written entries and keep all information within the appropriate fields.

6. Using the Wrong Fingerprint Card or Submission Format

Different organizations require different fingerprint submission formats. Some accept traditional ink fingerprint cards, while others require electronic Live Scan submissions or a specific digital fingerprint file.

Submitting an FD-258 card when the agency requires another form of fingerprinting may cause your application to be returned or rejected.

How to Avoid It

  • Verify the fingerprint format required by your requesting agency.
  • Confirm whether an FD-258 card is acceptable.
  • Check whether electronic fingerprinting is mandatory.
  • Bring any agency-specific instructions to your appointment.
  • Verify the correct destination and submission procedure.

If you’re unsure which method you need, learn more about ink and roll fingerprinting in New Jersey.

7. Poor Fingerprinting Technique or Improper Handling

Fingerprint capture requires attention to detail. Inconsistent rolling, inadequate coverage, or improper handling of the card can reduce fingerprint quality.

For example, fingerprints must generally be rolled from one edge of the nail to the other to capture sufficient ridge detail. Incomplete impressions may leave out information needed for fingerprint comparison.

Cards can also become difficult to process if fingerprint blocks contain stray marks, damage, or unauthorized corrections.

How to Avoid It

  • Choose a professional fingerprinting service.
  • Keep fingers relaxed and follow technician instructions.
  • Ensure each rolled fingerprint captures the required ridge area.
  • Allow ink impressions to dry before handling the card.
  • Store completed fingerprint cards carefully to prevent damage.

Professional assistance can reduce avoidable errors, although final acceptance always depends on the receiving agency.

What Should You Do If Your Fingerprint Card Is Rejected?

If you receive a fingerprint rejection notice, don’t immediately submit the same card again. First, identify why it was rejected and follow the instructions provided by the receiving agency.

Step 1: Review the Rejection Notice

Determine whether the problem involves fingerprint quality, missing information, an incorrect format, or another submission issue.

Step 2: Contact the Requesting Agency

Ask whether you need a new fingerprint card, a corrected application, or a different submission method. Confirm any resubmission deadlines and applicable fees.

Step 3: Schedule Professional Fingerprinting

If a new card is needed, visit a professional fingerprinting provider to have your impressions captured again.

Step 4: Prepare Your Hands

Keep your hands clean, address excessive dryness where possible, and inform the technician about any skin conditions affecting your fingerprints.

Step 5: Verify Everything Before Resubmission

Review the fingerprint impressions, required personal information, agency codes, and submission instructions before sending your replacement card.

For FBI Identity History Summary requests involving repeated fingerprint-quality rejections, the FBI recommends having multiple fingerprint sets taken, preferably by a fingerprinting technician. Other programs may have different resubmission requirements.

How to Prevent a Rejected Fingerprint Card in New Jersey

The best approach is to prepare before your fingerprinting appointment and ensure that the service matches your agency’s requirements.

Before your appointment:

  • Confirm whether you need FD-258, Live Scan, or another fingerprint format.
  • Bring a valid government-issued photo ID.
  • Bring any fingerprinting instructions provided by your employer or agency.
  • Keep your hands clean and avoid excessive lotion immediately before capture.
  • Inform the technician about scars, cuts, dry skin, or worn fingerprints.
  • Review the completed card before submission.

These simple steps can help reduce avoidable fingerprint rejection risks and unnecessary application delays.

Why Choose Jersey Fingerprinting for FD-258 Fingerprinting?

At Jersey Fingerprinting, we provide professional fingerprinting services for individuals, employers, and organizations throughout New Jersey.

Our services include:

  • FD-258 ink and roll fingerprinting.
  • Digital and inkless fingerprinting.
  • FBI background check fingerprinting.
  • Mobile fingerprinting services for eligible appointments.
  • Fingerprinting for employment and professional licensing.
  • Fingerprinting for adoption, international documentation, and other official requirements.

Our team focuses on clear fingerprint capture, proper card completion, and a convenient appointment experience.

We serve clients at our Princeton, New Jersey location and offer mobile fingerprinting options across eligible service areas.

To compare fingerprinting service fees, visit our New Jersey fingerprinting pricing page.

Frequently Asked Questions About Rejected Fingerprint Cards

1. Why was my fingerprint card rejected?

Your fingerprint card may have been rejected because of smudged or unclear impressions, missing fingerprints, incorrect finger placement, incomplete personal information, or an unacceptable submission format. Review the rejection notice for the specific reason.

2. What happens if the FBI rejects my fingerprints?

If the FBI cannot process your fingerprints, you may receive instructions for resubmission. Depending on the program, you may need to provide new fingerprint impressions or additional documentation.

3. Can dry fingers cause fingerprint rejection?

Yes. Excessively dry or worn fingertips can produce faint impressions with insufficient ridge detail. Proper preparation and fingerprinting techniques may help improve image quality.

4. Can I reuse a rejected fingerprint card?

Do not assume a rejected card can be reused. If the impressions themselves are unsuitable, new fingerprints will normally be necessary. Follow the receiving agency’s specific instructions.

5. How much does fingerprinting cost in New Jersey?

Fingerprinting fees depend on the method, provider, and any additional submission requirements. Visit our fingerprinting pricing page for published service rates.

6. Does Live Scan eliminate fingerprint rejections?

No. Live Scan can help technicians identify certain image-quality problems during capture, but electronic fingerprints can still be rejected because of poor ridge detail, incorrect placement, or submission errors.

7. Where can I get my fingerprints retaken in New Jersey?

Jersey Fingerprinting offers professional FD-258 and digital fingerprinting services at its Princeton location, along with mobile options for eligible appointments. Contact us to confirm the service required for your resubmission.

Final Thoughts: Avoid Fingerprint Rejection Before It Happens

A rejected fingerprint card can interrupt important background checks, employment applications, licensing procedures, and other official processes.

By understanding these seven common fingerprint rejection reasons, preparing your hands, checking your paperwork, and choosing a professional fingerprinting provider, you can reduce the chance of preventable errors.

At Jersey Fingerprinting, our goal is to help clients complete fingerprinting accurately and conveniently.

Need Professional Fingerprinting in New Jersey?

Don’t let avoidable fingerprint card mistakes delay your application. Whether you need a new FD-258 card or fingerprints retaken after a rejection, Jersey Fingerprinting can help with professional fingerprint capture.

Schedule Your Fingerprinting Appointment with Jersey Fingerprinting

Disclaimer: Fingerprint acceptance, resubmission requirements, fees, and processing timelines are determined by the receiving agency. Professional fingerprinting helps reduce avoidable errors but does not guarantee acceptance.